PVDFMembrane Grade-Powder

PVDFMembrane Grade-Powder
Product Details

HAIFLONTM PVDF Membrane Grade, FP-814


CAS No.24937-79-9


Testing Standard

Testing condition



Rotational viscosity

Rotational viscometer

0.1g/mL DMAC



Intrinsic viscosity

Ubbelohde viscometer




Melting point

ASTIVl D3418

Secondary melting point




Drying weight-loss method





The solution should be unmuddy, clear, transparent, colorless or a little fellow-  colored. There should be no impurity or insoluble matters in it

Method of forming

Casting after dissolve

Fundamental uses

Microfiltration membrane, casting membrane


Good dissolvability in some solvents

Safety precautions

The homopolymer of vinylidene fluoride (VQF) begin to have a slight decomposition with HF gas released above300°C. Avoid processing or using the products at the temperature above 370°C in order to prevent toxic gas release

Workers should avoid breathing in harmful gases during processing and wear necessary labor protection stuff.

Keep the dust away from being breathed in nasal cavity and infecting eyes.

After production, have a complete clean up of faces and hands.

Disposal of the wastes produced in the processing must be dealt with by specialized personnel for waste disposal and should be conducted according to waste regulations in relevant countries, regions and local places,

Before processing, please read the safety data sheet carefully.

Storage and disposal

The products should be stored in clean, cool, shady, and dry warehouses so as to avoid the mix with dust and moisture. During transportation, violent vibration must be avoided. Prevent any cases aggregation


PVDF Powder is first packed in polyethylene plastic bags and then put into hard cardboard bucket. 

Net weight per bucket: 20kg.